Filter
Top Products
15
Setting Oven Controls
SETTING TEMPERATURE DISPLAY — FAHRENHEIT
OR CELSIUS:
The or and or pads control the Fahrenheit or Celsius temperature display
modes. The oven control can be programmed to display temperatures in Fahrenheit or
Celsius. The oven has been preset at the factory to display in Fahrenheit.
Note: Both ovens will be changed at the same time.
To change display from Fahrenheit to Celsius or Celsius
to Fahrenheit:
1. Press or for 6 seconds. A beep will sound,
"- - -"
will appear,
"UPPER"
,
"BROIL"
will flash in the display (Figure 1). After 6 seconds a
beep will be heard and
"F"
(Figure 2) or
"C"
(Figure 3) will appear in
the display.
If
"F"
appears, the display is set to show temperatures in Fahrenheit
(Figure 2). If
"C"
appears, the display is set to show temperatures in
Celsius (Figure 3).
2. Press or to switch between Fahrenheit or Celsius display
modes. The display will show either
"F"
(Figure 2) or
"C"
(Figure 3).
3. Press to accept the change or press or to reject the
change.
Figure 1
Figure 2
Figure 3
UPPER
ROAST
LOCKED
WARM
BAKE
DELAY
CONV
BROIL
TIMED
UPPER
TIMER
REMOVE
LOWER
DOOR
RACKS
CLEAN
CONV
BROIL
TIMED
WARM
BAKE
DELAY
LOWER
ROAST
LOCKED