Filter
Top Products
Operating Instructions
30
Switching off the dishwasher
If the acoustic signal has been enabled, a continuous tone will sound
for 15 seconds at the end of the programme.
1
Hot steam may escape if the door is opened immediately after the pro-
gramme has ended. Therefore:
0 1. Open the door carefully.
2. Switch off the dishwasher by pressing the ON/OFF button.
All display indicators will go out.
If you do not switch off the dishwasher, the acoustic signal will sound
again 3 minutes later and 6 minutes later.
3
Removing the dishes
• Hot dishes are sensitive to knocks. The dishes should therefore be
allowed to cool before they are removed.
• Leave the dishes in the dishwasher for approximately 15 minutes fol-
lowing the end of the programme to enable better drying and cool-
ing down of dishes.
• Empty the lower basket first, then the upper basket. This will avoid
water spots, which are caused by remaining water in the upper bas-
ket dripping onto the dishes in the lower basket.
Care and Cleaning
1
Do not under any circumstances use furniture care products or aggres-
sive cleaners.
• If necessary, clean the controls only with a soft cloth and pure warm
water.
• Occasionally check the internal containers, door seal, and water inlet
for soiling, clean if necessary.