Filter
Top Products
Operating Instructions
33
After rectifying the fault related to 1 or 2 warning tones press the
button for the commenced dishwashing cycle. The dishwashing cycle
will continue.
If the fault is displayed again, please contact your Local Service Force
Centre.
3
For all other errors displayed, please contact your Local Service Force
Centre stating the error code.
Two short continuously
repeated warning tones
can be heard,
the cycle indicator for the
selected dishwashing cycle is
flashing,
the end cycle indicator is
flashing twice repeatedly.
The siphon is blocked. Clean out siphon.
The water drain hose
has not been correctly
laid.
Check hose installation.
Three short continuously
repeated warning tones
can be heard,
the end cycle indicator is
flashing three times repeat-
edly.
The leak prevention sys-
tem has been triggered.
Turn off the tap and contact
your Local Service Force Cen-
tre.
Malfunction Possible cause Remedy