Electrolux 5070 Dishwasher User Manual


 
Installation and Connection Instructions
30
INSTALLATION AND CONNECTION
INSTRUCTIONS
Installing the Dishwasher
The dishwasher must be installed on a firm floor and adjusted such
that it is stable and level.
To compensate for unevenness in the
floor and to match the height of the
appliance to that of surrounding units
extend the threaded feet by unscrew-
ing. Depending on the design of the
threaded feet use either
an open-end spanner
or
a screwdriver.
For built-in, integrated and fully integrated dishwashers, the rear feet
should be adjusted from the front of the appliance using a screwdriver.
The drain hose, inlet hose and mains cable must be laid such that they
are free to move in the rear of the plinth recess, so that they cannot
be kinked or crushed.
The dishwasher must also be screwed on tightly to the work surface
or to the adjoining units. This is absolutely necessary so that its
stability is guaranteed according to VDE regulations.