Filter
Top Products
Electrolux Professional S.p.A.
Ovens Platform Customer Support
Technical Training & Service
AOS_Q OVENS – Service manual
(593804600 - ENG)
File: AOS ONE service manual (ENG).01.doc ©Copyright 2007 by Electrolux Professional P.18/31
Using the pressure inlet signed with “–” and with positive reading on the display as in the fig. 33-34, this
means we are measuring – 0.16 hPa = – 16 Pa:
14 Change of the microprocessor board
In case of changing of the microprocessor board, the following operations/calibrations have to be done:
1) Default parameter programming
2) Change parameters according to the parameter list
3) Lambda probe calibration for lev. A ovens
4) By-pass calibration (lev. B ovens) and cavity offset (parameter OCA1), or only cavity offset for lev. A
and C ovens.
Fig. 31
Fig. 32
Fig. 33 Fig. 34