Filter
Top Products
Electrolux Professional S.p.A.
Ovens Platform Customer Support
Technical Training & Service
AOS_Q OVENS – Service manual
(593804600 - ENG)
File: AOS ONE service manual (ENG).01.doc ©Copyright 2007 by Electrolux Professional P.4/31
1 Programming the default parameters
Switch on the oven (fig. 1).
Just after the switching on, a lamp test will take place (fig 2).
At this point, during the lamp test phase, press the external service buttons A&C (fig.3) till you hear a beep.
B C A B B
At this point press the right service buttons B&C till you hear a beep (fig. 4).
Press then the left service buttons A&B till the beep (fig. 5).
At this point release the left button A keeping pressed the middle one B (fig. 6) till you hear 2 beeps.
Now release the middle button and, on the temperature display, you will see “PdEF”: the oven will switch
off and on automatically.
Fig. 1
Fig. 2
Fig. 3
Fig. 4 Fig. 5 Fig. 6
1
1
1 2
1
A B C A B C
A
C
1