Filter
Top Products
16
3 General information
• Once a function has been selected the corresponding function indi-
cator will flash for approx. 5 seconds. During this time the required
times can be set using the + or - button.
• After the required time has been set the function indicator will flash
again for approx. 5 seconds. After this the function indicator will stay
on. The set time will begin to count down.
• The acoustic signal can be deactivated by pressing any button.
• The required oven function and temperature may be selected before
or after setting the clock functions cook time d and end time e.
• When the cooking time has expired turn the oven function switch
and the temperature selection switch back to the off position.
2 Switching Off the Time Display
By switching off the time display you can save energy.
Switching off the time display
Press and hold down any two buttons until the display becomes dark
(approx. 10 seconds).
Switching on the time display
Press and hold down any two buttons until the time reappears in the
display (approx. 10 seconds).
3 The display can only be switched off if none of the clock functions cook
time d, end time e or countdown G is in use.