Filter
Top Products
TO REMOVE THE WIREWORK
RUNNERS
The wirework runners in both ovens can be
removed for cleaning.
1. Remove all shelves and furniture from the
oven.
2. Hold the wirework at the bottom, unclip from
the cavity side and gently pull towards the
centre of the oven.
3. Unhook the runner at the top and remove it
from the cavity.
4. To replace, hook the wirework back into the
oven sides.
CLEANING THE SHELVES,
WIREWORK RUNNERS AND
GRILL/OVEN FURNITURE
All removable parts, except the grill pan handle,
can be washed in the dishwasher.
The meat tin, grill pan, grill pan grid, oven
shelves and wirework runners may be cleaned
using a soap impregnated steel wool pad.
Soaking first in hot soapy water will make
cleaning easier.
CARE OF STAYCLEAN SURFACES
The top, sides and back panels of both ovens
are coated with a Stayclean finish. They should
not be cleaned manually.
Aerosol cleaners must not be used on
Stayclean surfaces and must not come into
contact with elements or the door seal, as
this may cause damage.
During normal use the Stayclean coating will
become splashed with fats and food residues.
By running the oven without food, the Stayclean
surfaces burn off any soilage. Regular use of
the oven cleaning cycle will help to keep the
panels in good condition. See page 30.
29
SIDE PANEL
CAVITY
CENTRE
Ensure that the wirework runners are
firmly in place before refitting the
oven shelves.