Filter
Top Products
11
Inserting the general purpose pan, grill, and tray
Inserting the general purpose pan and
tray:
The trays have a little bulge on the left and right edg-
es. These are provided as positioning guides and
must always be located towards the rear when in-
serting the tray.
Inserting/Removing the Fat Filter
The fat filter protects the rear wall heating element
against splashes of fat when roasting.
For grills:
Insert the tray at the desired position.
Inserting the fat filter
Holding the fat filter by the tab, insert the two re-
tainers into the opening on the rear wall of the oven
(fan opening) from the top downwards.
Removing the fat filter
Take hold of the tab on the fat filter and remove by
pulling upwards.