Filter
Top Products
66
3 To set the timer more quickly, leave your finger on the + or - sensor
field until the required time is reached.
If the - sensor field is operated first, the time setting will begin at
99 minutes; if the + sensor field is operated first, the time setting will
begin at 1 minute.
Displaying the remaining cooking time
If you select a cooking zone which is in timer mode, the cooking time
still remaining appears in the timer display window.
Using the timer to measure short periods of time
(“Minute Minder”).
1 Important! None of the cooking zones should be set with the Timer!
1.Touch the "On/Off" sensor field for around two seconds.
The digital display _ flashes.
2.Touch the TIMER W sensor field to activate the Timer function.
3.Using the + or - sensor fields, set the desired length of time (for ex-
ample, 20 minutes).
The Timer begins to run after a few seconds, and indicates the time re-
maining.
When the set time has elapsed, an audible signal is sounded.
4.Touch the TIMER W sensor field, to switch off the signal.
Ending the timer function prematurely
There are two ways of switching off the timer early:
Switching off the cooking zone and timer simultaneously
1.Select the desired cooking zone using the cooking zone buttons.
2.Touch the + and - buttons simultaneously: The cooking zone and
timer will switch off.
Switching off the timer - leaving the cooking zone active
1.Select the desired cooking zone using the cooking zone buttons.
2.Touch the “Timer” button again.
3.Touch the + and - buttons simultaneously:
– Only the timer will switch off.
– The cooking zone will stay on.