Filter
Top Products
16
Before using for the first time
Initial Cleaning
Wipe the ceramic glass surface with a damp cloth.
1 Important: Do not use any caustic, abrasive cleaners! The surface could
be damaged.
Operating the hob
Touch Control sensor field
To operate the Touch Control sensor field place your finger from above
flat onto the required field until the appropriate displays come on or go
out or the required function is carried out.
Switching on the Appliance
The entire appliance is switched on using the “On/Off” I sensor field.
Touch the “On/Off” sensor field for approx. 2 seconds.
The digital displays will show _ and the decimal point will flash.
3 Once the “On/Off” sensor field has been operated to switch on the ap-
pliance, one of the cooking zones must be selected within approx.
10 seconds using the cooking zone selection buttons. Otherwise the ap-
pliance switches off again for safety reasons.