Filter
Top Products
27
Maintenance
Condenser Cleaning — Every 3 Months
To maintain operational efficiency, clean the condenser every three months
(depending on environmental conditions, more or less frequent cleaning may be
necessary).
To remove and replace the grille for access to
the condenser fins follow this procedure (see
Figure 32):
1 Remove the screws at each end of the
grille.
2 Remove the grille.
3 Clean the condenser coil using a brush with a “combing” action, or a vacuum
cleaner. Do not touch the condenser coil.
4 Position the grille to align the screw holes with the cabinet.
5 Insert the grille screws and tighten. Do not over tighten.
!
WARNINGWARNING
WARNINGWARNING
WARNING
DO NOT touch the condenser fins. The condenser fins are SHARP. The fins can also
be easily damaged.
!
CACA
CACA
CA
UTIONUTION
UTIONUTION
UTION
DO NOT use any type of cleaner on the condenser unit.
Figure 32
!
WARNINGWARNING
WARNINGWARNING
WARNING
Disconnect electric power to the ice maker before cleaning the condenser.
CONDENSER