Filter
Top Products
12
Setting Oven Controls
SETTING OVEN LOCKOUT FEATURE
The or pad controls the Oven Lockout feature. The Oven Lockout feature
automatically locks the oven door and prevents the Warmer Drawer from being turned
on. It does not disable the clock, Timer, electric and gas surface burners, Warmer Zone
or the interior oven lights.
SETTING TEMPERATURE DISPLAY — FAHRENHEIT OR CELSIUS:
The or and or pads control the Fahrenheit or Celsius temperature
display modes. The oven control can be programmed to display temperatures in
Fahrenheit or Celsius. The oven has been preset at the factory to display in Fahrenheit.
To activate the Oven Lockout feature:
1. Press and hold or for 3 seconds (Figure 1).
2. After 3 seconds a beep will sound and "DOOR LOCKED" will flash on the
control panel. Once the oven door is locked the "DOOR LOCKED" indicator
will stop flashing and remain on.
To reactivate normal oven operation:
1. Press and hold or for 3 seconds. A beep will sound. The "DOOR
LOCKED" will continue to flash until the oven door has completely unlocked
(See Figure 1).
2. The range is again fully operational.
To change display from Fahrenheit to Celsius or Celsius to
Fahrenheit:
1. To tell if the display is set for Fahrenheit or Celsius. Press or (figure
2) and hold for 7 seconds; "550°" will appear in the display and a beep will
sound. If "F" appears, the display is set to show temperatures in Fahrenheit
(Figure 3). If "C" appears, the display is set to show temperatures in Celsius
(Figure 4).
2. Press or to switch between Fahrenheit or Celsius display modes. The
display will show either "F" (Figure 3) or "C" (Figure 4).
3. Press or to accept the change or Press or to reject the
change.
Figure 1
Figure 2
Figure 3
Figure 4