Filter
Top Products
25
a. Remove the toe kick panel.
b. Remove the two (2) screws on the bottom of the toe kick panel. Hold the bottom
edge of toe kick panel at the middle section and slightly lift towards the front. Hold
the toe kick panel on both ends and slowly pull away towards the front.
c. Remove the (2) screws holding the orifice bracket and locate the orifice. Remove
orifice using a adjustable wrench. Replace with oven burner orifice size (#55). Do
not over tighten. Replace the orifice bracket, aligning the new orifices into the air
shutter of the oven burner.
Conversion To LP Gas
CONVERT OVEN BURNER ORIFICE TO LP/PROPANE
GAS
a. b.
c.