Filter
Top Products
34 electrolux
GB
Fig.3
Remove double door mount (a, b, c)
from the body of the appliance in
steps. Please make sure the plastic
spacer (b) under the door mount is
also removed (Fig. 3).
Lift the freezer door up slightly and
remove.
Remove stops in both doors (t, z)
(Fig. 5).
Lift out the insert for the lower
covering grid (e) using a screw driver
(Fig. 4).
Unscrew the bottom door retaining pin
for the freezer door (h, f) and then
screw in on the other side. Don't
forget the spacer (h) (Fig. 4).
Insert the insert for the lower covering
grid (e) on the other side.
Fig. 1
Open the door of the fridge, dismantle
the top cover (j) by removing the 2
screws (a), then close the door
(Fig. 2).
Move the panel (g) from one side of
the top cover (2) to the other (Fig. 2).
Fig.2
Unscrew the 2 screws (c), remove the
door mount at the top right-hand side
(d), and unscrew the screw on the
other side (c), remove the panel (b)
and place in an empty plastic bag.
Lift the fridge door up slightly and
remove.
Unscrew the screw (m), remove the
door stopper (h) and attach reversed
on the other side (Fig. 2).