Filter
Top Products
7
Prior to the first use
Daytime setting
When the oven has been connected to the mains and
after failureof electricity,the time displayof theelectro-
nic autotimer flashes 0.00 and AUTO. The present
daytime hasto be set. Without this, theoven cannot be
used. The time display covers the range from 0.01 to
24.00 hours.
. Push buttons and simultaneously and
hold it.
. At atime set the present daytime bypushing
button forwards or button backwards.
To make corrections of time (summer--/winter--time,
etc.) simultaneously press the two adjusting buttons
and adjust the actual time with or .
First cleaning
In order to remove possible production remnants,
clean the appliance once prior to first use.
Remove any possibly existing labels and protective
foils from the front of the appliance.
Clean control panel and oven door with hot water and
a washing-up liquid and dry.
Remove the accessories from the oven and wash
them.
The clean-enammelled cavity has to be washedo with
warm water and a washing-up liquid. Then dry it.
The oven lighting may be switched on for this purpose
by setting the function switch to position .
First heating up
Prior to first use the oven must be heated up
once.Take carefora sufficientspace ventilation.
Set functionswitch to top/ bottom heat and temperatu-
re selector knob to 250
o
C.
Holding this setting, operate the empty and closed
oven for 60 minutes.
D
250
STOP
STOP