Electrolux EOD67043 Double Oven User Manual


 
2. Wipe out the oven after every use with a
solution of washing-up liquid and then dry
it.
Remove stubborn dirt with special oven
cleaners.
Important! When using oven sprays, please
follow the manufacturer's instructions
exactly. Make sure that no visible remaining
detergents are left after the cleaning with
oven spray!
Accessories
Clean and dry the oven accessories (shelf,
tray, roasting pan, etc.) after each use.
Soak the items to make cleaning easier.
Catalytic cavity cleaning (selected
models only)
Warning! You must not wipe out the
cavity side walls. It will damage the
catalytic surface.
1. Remove all slide-in parts from the oven.
2. Wipe the floor of the oven clean with
warm washing-up solution and dry.
3. Set the oven CATA function. You will find
it in menu after other oven functions.
4. Oven will switch off after one hour.
5. Wipe away any remaining a damp from
the floor with soft sponge.
Warning! Before you wipe away wait
until the cavity is cool.
Warning!
Do not use oven spray or abrasive cleaning
agents. Do not use soap or other cleansing
agents. The catalytic coating may otherwise
be damaged.
After long periods of use, the catalytic
coating may become slightly discol-
oured. This has no effect on the catalytic
properties.
Side rails
The side rails on the right and left-hand side
of the oven interior can be removed for the
purpose of cleaning the side walls.
Removing the side rails
First pull the rails away from the oven wall at
the front (1) and then unhook them at the
back (2).
Replace the side rails
Important! Important The rounded ends of
the guide bars must point to the front.
To install, first insert the rails in the holes at
the back (1) and then lower into position at
the front and press into place (2).
1
2
22 electrolux