Filter
Top Products
5
Before the First Use
Remove all packaging, both inside and outside
the oven, before using the appliance.
Before first use, the oven should be heated without food.
During this time, an unpleasant odour may be emitted.
This is quite normal.
1. Switch the gas oven function control
knob to and the thermostat control knob
to maximum position.
2. Open a window for ventilation.
3. Allow the oven to run empty for
approximately 45 minutes.
100
150
200
50
MAX
FO 2482
Thermostat Control Knob
Turn the thermostat control knob clockwise to select
temperatures between 50°C and 250°C (MAX).
Mains on Light
The oven function control light will come on when the oven
function control knob is set.
Thermostat Control Light
The thermostat control light will come on when the
thermostat control knob is turned. The light will remain on
until the correct temperature is reached. It will then cycle
on and off to show the temperature is being maintained.
Gas stop Control Light
The gas stop control light will come on when the oven
burner switches off. To switch on, turn the control knob to
zero and wait some seconds, then ignite again.
Cooling fan
The cooling fan operates during cooking. Air is expelled
through vents between the oven door and the control
panel, as shown in the diagram.
The cooling fan may run on after the oven is switched off
to keep the controls cool. This is quite normal.
The Safety Thermostat (Electric
Grill)
This oven is provided with a safety thermostat. In case of
malfunctioning of the main thermostat, and consequent
over-heating, the safety device will stop the power supply
to the appliance. If this happens, call your local Service
Force Centre. Under no circumstances should you
attempt to repair the appliance yourself.
F