Filter
Top Products
THE DISPLAY
The display shows:
• The electronic adjustment of the level of
the water softener
• The activation and deactivation of the
rinse aid dispenser (only with the multitab
function on)
• The number of the washing program
• The remaining time to the end of the
washing program
• The end of a washing program (the dis-
play shows a zero)
• The time of the delay start
• The alarm codes
• The activation and deactivation of the
acoustic signals.
DELAY START BUTTON
Press this button to delay the start of the
washing program from 1 to 24 hours. Refer
to 'Setting and starting a washing pro-
gram'.
PROGRAM BUTTONS
Press one of these buttons repeatedly to
set a washing program. Each time you
press the button, the display shows a num-
ber that is related to a washing program.
Refer to 'Washing programs' chart.
ENERGY SAVER BUTTON
This function decreases the temperature in
the drying phase. The power consumption
decreases by 25%. The dishes can be wet
at the end of the program when you open
the appliance door. We recommend that
you keep the door ajar and let the dishes
dry.
Press this button to activate the function.
The related indicator comes on.
The function can be activated with all wash-
ing programs but has effect only on some
programs. To see where the energy saver
function has effect, refer to the 'Washing
programs' chart.
MULTITAB BUTTON
Press this button to activate or deactivate
the multitab function. Refer to 'Multitab
function'.
RESET BUTTON
Press this button to cancel a washing pro-
gram in operation. Refer to 'Setting and
starting a washing program'.
PROGRAM-DISPLAY
The program-display is divided in 5 LED
lamps.
• When you switch on the appliance, all 5
LED lamps come on with a blue light.
• When you select a washing program or
the delay start, all 5 LED lamps stay on
with a blue light.
• When the washing program starts, only
the first LED lamp is on. The remaining
LED lamps come on gradually as the
washing program operates.
• When the countdown operates, only the
first LED lamp is on.
• When the washing program ends, all 5
LED lamps come on with a green light.
• When the appliance has a malfunction, all
5 LED lamps flash with a blue light
SETTING MODE
The appliance must be in setting mode
for these operations:
• To set and start a washing program.
• To set and start a delay start.
• To adjust electronically the level of the
water softener.
• To activate or deactivate the rinse aid
dispenser (only with the multitab function
on).
• To deactivate or activate the acoustic
signals.
Switch on the appliance. The appliance
is in setting mode when:
• The display shows two horizontal status
bars.
Switch on the appliance. The appliance
is not in setting mode when:
• The display shows the time of the wash-
ing program or of the delay start.
– To go back to the setting mode, it is
necessary to cancel the program or
the delay start. Refer to 'Setting and
starting a washing program'.
ACOUSTIC SIGNALS
You can hear the acoustic signals when:
• The washing program is completed.
6 electrolux