Filter
Top Products
10 electrolux control panel
Setting mode
Always remember that when:
- setting the water softener,
- activating/deactivating the audible
signals,
the appliance MUST be in setting
mode:
● Press On/Off button, the end of
programme indicator light is
flashing = appliance in setting
mode.
● Press On/Off button, a programme
light is illuminated = last performed
or selected programme still set.
In this case, to return to setting
mode, the programme has to be
cancelled.
To cancel a set programme or a
programme in progress
Press and keep pressed, for about 3
seconds, the programme
selection/cancel button until the light
of the set programme turns off and
the end of programme indicator light
is flashing. The programme has been
cancelled and the machine is now in
setting mode.
117989 53/0en 20-02-2007 15:44 Pagina 10