Filter
Top Products
31
INSTALLATION AND CONNECTION
INSTRUCTIONS
Installing the Dishwasher
• The dishwasher must be installed on a firm floor
and adjusted to ensure that it is stable and level.
• To compensate for unevenness in the floor and to
match the height of the appliance to that of sur-
rounding units extend the threaded feet by
unscrewing:
– use a screwdriver
.
• For built-in, integrated and fully integrated dish-
washers, the rear feet should be adjusted from the
front of the appliance using a screwdriver.
• The drain hose, inlet hose and mains cable must
not be kinked or crushed when the dishwasher is
in position.
• In addition, the dishwasher must be firmly
screwed to the work surface or to the neighbour-
ing units. This is essential to ensure the dish-
washer does not tip.
Installing the Furniture Door
(see installation template supplied)
3
The door of the appliance can be fitted with a
wooden furniture door of the following dimen-
sions:
Width: 591 mm – 594 mm
Thick-
ness:
16 mm – 24 mm
Height: max. 715 mm
Weight: max. 10 kg