Filter
Top Products
26 electrolux daily use
Set and start a washing programme
1. Check that the baskets have been
loaded correctly and that the spray
arms are free to rotate
2. Check that the water tap is opened
3. Press the On/Off button.
4. Select the washing programme.
5. If required, postpone the start/end
time of the washing programme.
6. Set, if required, available options.
7. Press the OK button and close the
door, the washing programme will
start automatically.
If the delay start has been set, the
countdown will start automatically.
Once the delay start has elapsed
the programme will start
automatically.
The opening of the door will interrupt
the countdown. Close the door; the
countdown will continue from the point
at which it was interrupted.
If the delay start is cancelled, also the
washing programme will be cancelled.
If a new washing programme will be
set, check that there is detergent in
the detergent dispenser.
Interrupt or cancel a washing
programme in progress ONLY if it’s
absolutely necessary.
Attention! Hot steam may escape
when the door is opened. Open the
door carefully.
Interrupt a washing programme in
progress:
● Open the dishwasher door; the
programme will stop. The message
PLEASE CLOSE DOOR is
displayed.
Close the dishwasher door; the
programme will continue from the
point at which it was interrupted.
Cancel a washing programme or a
delay start in progress
● Open the dishwasher door.
● Press simultaneously both Option
and OK buttons.
● The message CONFIRM
CANCEL? is displayed.
● Press OK button to confirm.
● The appliance returns to setting
mode and the message CHOOSE
PROGRAMME is displayed.
Once the washing programme has
started, a point-shaped optical signal
appears on the floor beneath the
dishwasher’s door.
This optical signal will remain
illuminated for all the duration of the
washing programme.
If the appliance has been installed
higher up with a furniture door
mounted flush, the optical signal will
be no longer visible.
117989 78/0en 5-02-2007 12:31 Pagina 26