Filter
Top Products
something not working electrolux 33
Malfunction Possible cause and solution
The programme does not start
● The dishwasher’s door has not been
properly closed. (Message PLEASE
CLOSE DOOR displayed)
Close the door.
● The main plug is not plugged in.
Insert the main plug.
● Delay start has been set.
If dishes are to be washed immediately,
cancel the delay start.
● The fuse has blown out in the household
fuse box.
Replace the fuse.
Once these checks have been carried
out; switch on the appliance and close
the dishwasher door.
The programme will continue from the
point at which it was interrupted.
If the message reappears in the
display contact the Service Force
Centre.
For other messages not described in
the chart, please contact your Service
Force Centre.
Contact your local Service Force
Centre, quoting the model (Mod.),
product number (PNC) and serial
number (S.N.).
This information can be found on the
rating plate located on the side of the
dishwasher door.
So that you always have these
numbers at hand, we recommend you
to make a note of them here:
Mod. : . . . . . . . . . . . . . . . . . . . . . . .
PNC :. . . . . . . . . . . . . . . . . . . . . . . .
S.N. : . . . . . . . . . . . . . . . . . . . . . . . .
117989 78/0en 5-02-2007 12:35 Pagina 33