Filter
Top Products
21
We recommend that the refrigerator is
placed on a "run - off" mat intended for
refrigerators and freezers, which
makes i t easier to detect possible
leakage.
When the water system is started for
the first time.
The following should be carried out
when the refrigerator is correctly
connected to the water supply in the
building:
Open the tap on the water connection
and start up the refrigerator. The ice
machine starts automatically. It will
start fillin g with water will start when
the temperature is sufficiently low. Do
not use ice produced during the first
day since there is risk of a slight taste.
Electrical cord
Do not remove the power cord by
pulling on its lead, particulary when the
product is being pulled out of its niche.
· Damage to the cord may cause a
short-circuit, fire and/or electric shock.
· In the event of damage to the
appliance's main cable, only an
authorised service company
recommended by the manufacturer or
a similarly qualified person may adjust
it in order to avoid shock hazard for the
user.
Installing the cabinet
When two appliances are placed
beside each other, the spacers
enclosed in the plastic wrapping
should be glued between the
appliances. As shown in the
illustration.
Make sure that the power plug is not
squashed or damaged by the back of
the product.
· A d amaged power p lug may
overheat and cause a fire.
Do n ot place heavy articles or the
product itself on the power cord.
· there is a risk of a short circuit and
fire.
If the power plug socket is loose, do
not insert the power plug.
· there is a risk of electric shock or
fire.
To obtain the best performance from
the cabinet, ensure:
· the cabinet is placed in a dry, cool
place and is not exposed to direct
sunlight.
· the cabinet is not placed close to a
source of heat, e.g. a cooker or
dishwasher.
· the cabinet is level. The cabinet
should not lean against any wall. If
necessary adjust the feet using the
adjustment spanner supplied.