Filter
Top Products
Operating Instructions
28
Setting or Changing the Delay Start Timer
Using the delay start timer you can:
1. Press the ON/OFF button.
2. Press the DELAY TIMER button until the required delay (in hours) is
flashing on the multi-display.
3. Press the button for the desired wash programme. The multi-display
now displays the number of hours until the wash programme starts.
4. The wash programme starts automatically at the end of the time delay
set.
Changing the delay start:
As long as the wash programme has not started, you can change the
delay start set by pressing the DELAY TIMER button.
Load Sensing – Sensor Logic
If a wash programme is started even though there are only a few dishes
in the upper and/or lower rack, an intelligent electronic system adjusts
the amount of water and the duration of the wash programme to the
number of dishes. By this means it is possible to wash only a few dishes
quickly and economically. At half load (6 place settings), up to 2 litres
of water and 0.2 kWh of electricity are saved.