Filter
Top Products
Operating Instructions
29
Switching Off the Dishwasher
Switch the dishwasher off when the multi-display indicates “0“ for the
remaining programme time and END is illuminated on the programme
progress display.
If the signal tone for the end of the washing programme is enabled, a
continuous tone indicates the end of the programme for 10 seconds. If
the dishwasher is not switched off, the continuous tone is repeated
twice after a few minutes.
0 1. Press the ON/OFF button. All indicators go out.
1
Hot steam may escape if the door is opened immediately after the end
of the programme.
2. Open the door carefully, as steam may escape.
Emptying the Dishwasher
3
• The dishes should be allowed to cool down before removing them
from the appliance, as hot dishes can be sensitive to knocks.
• The dishes will dry quicker if, when the programme has finished, you
briefly open the door fully and then leave it slightly ajar, when the
programme has finished.
• Leave the dishes in the dishwasher for approx. 15 minutes after the
end of the programme so that they dry better and can cool down.
• Empty the lower rack first, then the upper rack. In this way you will
avoid any water left on the upper rack dripping onto the dishes in the
lower rack and causing water spots.