Electrolux QT3549K Freezer User Manual


 
Care and cleaning
CAUTION!
Unplug the appliance before carrying out any maintenance operation.
This appliance contains hydrocarbons in its cooling unit; maintenance and recharging must
therefore only be carried out by authorized technicians.
Periodic cleaning
The equipment has to be cleaned regularly:
clean the inside and accessories with lukewarm water and some neutral soap.
regularly check the door seals and wipe clean to ensure they are clean and free from
debris.
rinse and dry thoroughly.
Do not pull, move or damage any pipes and/or cables inside the cabinet.
Never use detergents, abrasive powders, highly perfumed cleaning products or wax polishes
to clean the interior as this will damage the surface and leave a strong odour.
Clean the condenser (black grill) and the compressor at the back of the appliance with a
brush or a vacuum cleaner. This operation will improve the performance of the appliance
and save energy consumption.
Take care of not to damage the cooling system.
When moving the cabinet, lift it by the front edge to avoid scratching the floor.
Many proprietary kitchen surface cleaners contain chemicals that can attack/damage the
plastics used in this appliance. For this reason use a soft cloth rinsed in warm water and
neutral soap emulsion for cleaning external surfaces.
Do not use detergents or abrasive paste as these will damage the paint, or stainless steel
anti finger print coating.
After cleaning, reconnect the equipment to the mains supply.
Cleaning the ice maker
When necessary, clean the surfaces of the dispenser and the ice container that are accessible
from the outside, using only a soft cloth and warm water.
Ensure that the ice container is thoroughly dry before being refitted.
Do not use detergents or abrasive paste.
Cleaning the ventilation grille
The ventilation grille can be removed for washing.
Make sure the door is open and then:
12
Care and cleaning