Filter
Top Products
13
Measure from the bottom of the air deector to
the bottom of the hood outlet, as shown.
Cut the duct at the measured size.
Uninstall the air deector removing the 4
assembly screws.
Slip the duct onto the bottom of the deector.
Place the assembled deector and duct over the
exhaust outlet from the hood. Assemble the air
deector with the duct cover bracket with 4
assembly screws provided as shown.
Use duct tape to seal the deector and at the
exhaust outlet from the hood.
•
•
•
•
•
•
Connecting the ductwork
Install ductwork, making connections in the
direction of airow as illustrated.
Push duct over the exhaust outlet.
Wrap all duct joints and the ange connections
with duct tape for an airtight seal.
Make the same connection in the wall or ceiling
vent exit.
Air deect installation
(Recirculating accessories)
Assemble the air deector with the duct cover
bracket with 4 assembly screws provided as
shown.
•
•
•
•
•
Installing the hood
Ductwork
Hood
Duct tape
over seams