Filter
Top Products
6
List of Materials
List of Materials
Parts included in your hood
Hood structure assembly with blower, transition.
4 Lamps already installed.
4 Duct covers.
2 Bottom.
2 Top.
Hardware bag with:
Ceiling Mount Template
Use, care and installation guide
Wood screws (4 pieces - 3/16” x 1” 3/4)
Assembly screws (74 pieces)
4 Plastic Springs to attach duct covers
8 Vertical supports.
2 Upper Ductcover supports.
2 Horizontal supports.
Optional accessories
Recirculation KIT
Tools/Materials required
Aluminum tape
Wire nuts
Tape to mount template
8” rounded metal duct (length to suit installation)
Measuring tape
Pliers
Gloves to protect against sharp edges
Knife
Safety glasses
Electric drill with 5/16” and 3/8” bits
Strain relief 1/2” conduit connector
Level
Phillips (Pozidrive) # 2 screwdriver + torx # 2
Wire cutter/stripper
Masking tape
Hammer
Saw, jigsaw or reciprocating saw
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1/2” electrical connector (junction box)•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Lamp
Vertical
supports
Duct cover
support
Upper
Duct cover
supports
Duct
Covers
Grease
Filter