Filter
Top Products
20
AEG/Electrolux 8184261-00/9
Installation
Unpacking
Unpack the cabinet and check that it is in good condition and free of any
transport damage. Notify the dealer immediately of any damage. Hand the
packaging over for recycling. For more information, contact your local
council or the dealer.
Do not allow children to play with the packaging. The plastic film can cause
suffocation.
Remove the transport supports
Remove the tape and the transport
supports from
· the door sides
· the shelves
Remove the transport support on the
glass shelf by pushing the support
forward along the edge of the shelf
until it stops. Take hold of the rear
edge of the glass shelf and pull the
shelf and transport support forward
until the shelf tilts and the transport
support can be removed.
Cleaning
Wash the inside of the cabinet using
lukewarm water, a mild washing-up
detergent and a soft cloth.
Mounting the handles
1. S crew the top handle bracket to
the handle rod.
2. Fit the bottom han dle bracket on
the lower left-hand side of the door.
3. Fit the top handle bracket on the
top left-hand side of the door and
screw the handle rod to the bottom
handle bracket.
Caution! Do not overtighten the
screws (max. 2 Nm) as you may
damage the door handles.
1
2
3