Filter
Top Products
6
Removing The Doors
GETTING THROUGH NARROW SPACES
If your refrigerator will not fit through an entrance area, you can reduce its size by
removing the doors. Check first by measuring the entrance.
Required Tools
You will need the following tools:
To prepare for removing the doors:
1 Make sure the electrical power cord is unplugged from the wall outlet.
2 Open both doors and remove the toe grille.
3 Remove any food from the door shelves.
4 Close the doors.
To remove the top hinge cover:
1 Remove the three screws from the cover over the top door hinges.
2 Pull the cover forward about a half-inch and
lift it off.
NONO
NONO
NO
TETE
TETE
TE
For more information on removing the toe grille, please refer to the Installation section.
Adjustable
Wrench
Socket
Wrench Set
OR
Phillips Head
™
Tools Necessary:
3/8” Fixed
Wrench
AND
OR