Filter
Top Products
3. Installing the “Control Panel With the Heating Element (#5)”
Into its Place
• Lift up the “Control Panel with Heating Element” (#5).
• Slide the “Guide Edges” on the Control Panel (#5) into the “Guide Rails” mounted on
the metal body (#1).
• Slide the “Guide Edges” down till the end.
Important Notice:
The Automatic Safety Interlock Switch ensures that the unit will not operate unless the Control
Panel (#5) has been inserted into the “Guide Rails” on the metal body (#1) correctly.
6
Back of Main Body (#1)
Guide Rails
Control Panel (#5)
Safety Switch
Heating
Element
Guide
Edges
Safety Detachable Power Cord
The Deep Fryer has been specifically designed with your safety in mind. Bravetti
has incorporated a unique detachable power supply cord. This power supply cord
cord is designed to “Break Away” from the fryer body in the event that the supply cord
is inadvertently pulled. This is intended to prevent the tipping of the appliance and
hazardous spillage of hot oil.
The female receptacle portion of the power supply cord is permanently attached to
the rear of the the control panel ( #23). It is designed with a swivel to allow for easier
positioning of the appliance.
To connect the male power cord plug to the female receptacle on the appliance,
orient the male plug so that it mates with the female receptacle. The male plug can
only be inserted one way. If the male plug will not go into the receptacle on the
appliance, rotate the male plug 180°