Filter
Top Products
19
ENGLISHENGLISH
ENGLISHENGLISH
ENGLISH
* 12 grains and higher is extremely hard water and detergent alone may not be enough. You may need to
use a water softener to maximize the performance of your dishwasher. Also, in areas with extremely hard
water (9+) you may need to wash at lower temperatures to prevent hard water deposits from forming in tank
and wash system.
In hard water areas, both the dishes and the machine can develop a white or gray film after a while. This can
be removed by replacing the prewash detergent with two tablespoons of citric acid. If the water is very hard,
use a rinse aid that contains citric acid.
Different brands of dishwasher detergent have different amounts of phosphorous for softening water. If you
have hard water and use a detergent with less than 8.7% phosphorous content, you may need to use more
detergent or use a detergent with more than 8.7% phosphorous content.
NOTE: If you live in an area with hard water, after a time you may get hard water spots on your dishes.
Refer to page 27 for information on how to remove these spots.
RECOMMENDED DETERGENT AMOUNTS
BASED ON WATER HARDNESS
NOTE
:
We recommend that you do not add prewash detergent for the Quick or Light wash
programs.
1 teaspoon
1 to 1-1/2 tablespoons
1 teaspoon
1 to 2 tablespoons
1 teaspoon
2 to 3 tablespoons
Soft
(0-3 grains per gallon)
Medium
(4-8 grains per gallon)
Hard
(9+ grains*)
Prewash
Main wash
Prewash
Main wash
Prewash
Main wash
DETERGENT AMOUNTS
WATER HARDNESS