Filter
Top Products
wait a few seconds and press the button again to eject the
tape.
To unload a data cartridge, press the unload button on
the tape drive’s front panel. The tape drive completes the
current operation, writes any buffered data to tape,
unloads the tape from the tape path, and ejects the
cartridge.
Note: Some tape drives are configured to eject the tape
immediately when the unload button is pressed.
Refer to the EXB-8500 and EXB-8500c Product
Specification ifyouhaveatapedriveconfiguredin
this way.
Error During Unload Procedure
If an error exists before or during the unload procedure,
the unload sequence will be suspended and the amber
LED will flash. If the unload button is pressed again, the
unload sequence will be reattempted; however,
unwritten data in the buffer will not be written to tape.
The buffer and errors will be cleared.
28 EXB-8500/EXB-8500c 306261