Fisher & Paykel CG244 Cooktop User Manual


 
20
Installation instructions
Electrical connection and requirements
Important!
Plug only into a grounded three-prong power outlet.
Do not remove the grounding prong.
Do not use an adapter.
If codes permit the use of a separate grounding wire, it is recommended that a qualified
electrician determine that the ground path is adequate.
Check with a qualified electrician if you are not sure whether the cooktop is properly grounded.
Do NOT ground to a gas pipe.
See ‘Safety and warnings’ for additional electrical requirements.
A 120-volt, 60-Hz, AC-only, 15 A, fused electrical supply is required.
A time-delay fuse or circuit breaker is recommended. It is recommended that a separate circuit
serving only this appliance be provided.
The power outlet must be checked by a qualified electrician to see if it is wired with correct
polarity.
Wiring digrams
3-prong polarized
ground-type outlet
ground
prong
3-prong
ground plug
power
supply cable
NL
PA
A
CA
M
CA
A
NL
PA
M
CACA
CA CA
Fig. 18 Recommended grounding method
Fig. 19 Wiring diagram - CG122 models Fig. 20 Wiring diagram - CG244 models
US CA