Filter
Top Products
8
If you have a double DishDrawer®, each drawer has its own control panel and can run
independently of the other.
Power button
The button turns the DishDrawer® on or off. Opening the drawer will automatically turn the
DishDrawer® on for 30 seconds. To end a wash program in mid cycle, press the
button. Any
water in the DishDrawer® will be pumped out.
Start/Pause button
The button starts a wash program. Press the button to pause or restart the DishDrawer®
during a wash program. When paused, wait for three beeps before opening the drawer. Forcing
the drawer open while in mid cycle may cause damage or injury.
Delay start
The button also sets the Delay start feature which can delay the start of a wash program from
1 to 12 hours.
To activate Delay start
1
Press and hold the button until the delay symbol appears on the electronic display.
2
Continue holding the button down until the desired delay time has been reached.
3
The DishDrawer® will start once the delay time has elapsed and the drawer is closed.
To cancel Delay start
Press the button.
Lock button (optional)
The button activates/deactivates the Keylock or the Childlock functions.
Power
button
Time
remaining
Fault symbols - see ‘Fault
codes’ if they appear
Start/Pause
button
Wash program
progress symbol
Lock button
Keylock or Childlock is
activated
Delay start symbol
Salt reservoir is empty
(DD24-H models only)
Operating instructions - Controls (models with LCD)
US CA