Filter
Top Products
24
Option adjustments
How to make option adjustments (Integrated and Prefinished - no LCD)
Follow the steps
below
Rinse agent
setting
Water softener
setting
1
Auto power
option
End of wash
program beeps
option
Closed drawer
option
2
First
Enter Option adjustment mode:
1
Press the button to turn power on. Open DishDrawer.
2
Press and hold the and / buttons for 5 seconds until one long beep sounds.
Press the
button to
scroll through
options
Prefinished - no LCD
red / off
blue / off purple / on blue / on red / on
Integrated - no LCD
red / off
green / off orange / on green / on red / on
Make an
adjustment
The current setting is shown on the
wash program selector in red lights.
If four red lights are lit, the option
selected setting is set to four.
Press the
/
button to increase
the setting.
Press the
button to turn the selected option on or
off.
Save
Press the button to save the change.
Example
Rinse agent
setting set to four
Water softener
setting set to four
On
Off
On
Off
On
Off
1
Non-water softener models - the water softener setting does not appear in the sequence of options.
2
The option sequence will start again from the Rinse agent setting.
US CA