Filter
Top Products
22
Option adjustments
How to make option adjustments (Integrated and Prefinished - no LCD)
Follow the steps
below Rinse aid setting
Auto power
option
End of wash
programme
beeps option
Closed drawer
option
*
First
Enter Option adjustment mode:
1
Press the button to turn power on. Open DishDrawer®.
2
Press and hold the and / buttons for 5 seconds until one long beep sounds.
Press the
button to
scroll through
options
Prefinished - no LCD
red / off
purple / on blue / on red / on
Integrated - no LCD
red / off
orange / on green / on red / on
Make an
adjustment
The current setting is shown on the
wash programme selector in red
lights. If four red lights are lit, the
option selected setting is set to 4.
Press the
/
button to increase
the setting.
Press the /
button to turn the selected option on or off.
Save
Press the button to save the change.
Example
Rinse aid setting set to 4
On
Off
On
Off
On
Off
*
The option sequence will start again from the Rinse aid setting.