Filter
Top Products
30
Fault codes
Fault codes Possible causes What to do
F1
Flood switch has been
activated.
Turn the water and power supply to the
DishDrawer® off and call your Authorised
Service Centre or Customer Care.
F2
Motor problem. Call your Authorised Service Centre or
Customer Care.
F3
Temperature sensor
failed.
Ensure water coming in through the inlet
hose is less than 65
o
C. You may need to
install a tempering valve on your water
supply.
F4
Faulty temperature
sensor or element.
Call your Authorised Service Centre or
Customer Care.
F5
Lid fault.
1
Turn power supply to DishDrawer® off,
then turn on power supply. Fault may
reset.
2
Call your Authorised Service Centre or
Customer Care.
F6
Lid fault.
1
Turn power supply to DishDrawer® off,
then turn on power supply. Fault may
reset.
2
Call your Authorised Service Centre or
Customer Care.
F7
Lid fault. Call your Authorised Service Centre or
Customer Care.
F8
Electrical problem.
1
Turn power supply to DishDrawer® off.
2
Call your Authorised Service Centre or
Customer Care.
F9
Electronics
malfunction.
Call your Authorised Service Centre or
Customer Care.