Filter
Top Products
21
User preference settings
The following settings can be adjusted to suit your preferences.
Rinse Aid setting
Reduce the Rinse Aid setting if there is excess foam after a wash programme.
Increase the Rinse Aid setting if dishes are wet or streaky after a wash programme.
Auto Power setting
By default, DishDrawer® will automatically turn on whenever the drawer is opened. Washing will
not start until the drawer is closed and the
button has been pressed. If you do not want the
DishDrawer® to turn on automatically, this feature can be turned off.
End of Wash Programme Beeps
By default, DishDrawer® will beep six times at the end of a wash programme. This feature can be
turned off.
Closed Drawer option
The Closed Drawer option will lock the DishDrawer® when the drawer is closed. When you wish
to open the drawer, press the
button. When the drawer is fully closed again, the lid will
automatically come down after 30 seconds and lock.
If the Lock feature is used in conjunction with the Closed Drawer Option, pressing the
button
will not unlock the drawer. The Lock feature must be turned off to enable DishDrawer® to be
opened.
Clean Dish Indicator option (Prefinished models with LCD only)
By default, DishDrawer® is programmed with the Clean Dish Indicator option off. When the
Clean Dish Indicator option is on, the
symbol will remain in the electronic display after a
wash programme has finished to indicate the dishes are clean. When you have unloaded all the
dishes, press the
button to return to normal operating mode.
This option might be useful when dishes have been left in DishDrawer® and you cannot
remember if they have been washed or in situations where household members regularly
remove a only few clean dishes without emptying the drawer.
We do not recommend the Clean Dish Indicator option be used in conjunction with the Closed
Drawer option.