Filter
Top Products
23
User preference settings
How to change settings (Prefinished with LCD)
Follow the steps
below
Rinse Aid
setting
Auto Power
setting
End of
Wash
Programme
Beeps
option
Closed
Drawer
option Clean Dish
1
First
Enter User preference settings
1
Press the button to turn power on. Open DishDrawer.
2
Press and hold the and buttons for 5 seconds until one long beep sounds.
Press the
button to
scroll through
options
Make an
adjustment
The current setting is shown on the
wash programme selector in red
lights. If four red lights are lit, the
option selected setting is set to four.
Press the
button to increase the
setting. The red lights will scroll up to
5 and then start from 1 again.
Press the
button to turn the selected option on or off.
Save
Press the button to save the change.
Example
Rinse Agent setting set to four
On
Off
On
Off
On
Off
On
Off
1
The settings sequence will start again from the rinse aid setting.