Filter
Top Products
16
3
1
1
2
INTEGRATED MODELS WITH REMOTE (NZ AU) ONLY - INSTALLING THE FRONT PANELS
REMOVE BRACKETS FROM PRODUCT
ATTACH PANELS TO PRODUCTEARTH THE PANELS
ATTACH PANELS TO PANEL BRACKETS
15a
17a 18a
16a
There must be at least
3 screws used each side
Align bottom of panels
with bottom of brackets
When refitting the
door pins,
ensure they are
orientated as shown.
2
2
1
1
2
3
16 mm x6
Important!
Ensure the rubber seal
between the drawer
and panels is kept in
place.
Repeat for the other drawer
Repeat for the other drawer
Electrical Shock Hazard
Before continuing, ensure that the product is
disconnected from the power supply.
Failure to follow this warning may result in
electrical shock, injury or re.
WARNING!
WARNING!
Important!
Break off and discard the tab
at the top of the Lower Panel
Bracket.
WARNING!
To earth the panel bracket, connect the earth
wire from the product to one of the tabs.
Any custom metal component (e.g. handle)
that extends past the rubber seal must be
earthed too.
Failure to follow these warnings may result
in electrical shock, injury or re.
Electrical Shock Hazard
Repeat for the other drawer