Filter
Top Products
18
1
2
3
16 mm x6
INTEGRATED MODELS WITH BADGE (GB IE) ONLY - INSTALLING THE FRONT PANELS & BADGE CONTROLS
DETERMINE BADGE CUTOUT LOCATIONS
ROUTE BADGE WIRING THROUGH PANEL ATTACH PANELS TO PANEL BRACKETS
REMOVE BRACKETS & DISCONNECT BADGES
15b
17b 18b
16b
There must be at least
3 screws used each side
Align bottom
of panels
with bottom
of brackets
1
3
4
1
2
1
2
Badge zone
228.5 mm
228.5 mm
127 mm
211 mm
54 mm
127 mm
30 mm
25 mm
d
g
e
z
o
n
e
Repeat for the other drawer
Repeat for the other drawer
Badge zone
Important!
Break off and discard the tab
at the top of the Lower Panel
Bracket.
Electrical Shock Hazard
Before continuing, ensure that the product is
disconnected from the power supply.
Failure to follow this warning may result in
electrical shock, injury or re.
WARNING!