Filter
Top Products
9
Using your dishwasher
a
Power
b
Programme button
c
Programme indicator
a
b
c
a
a
Power
b
Reset button
c
Delay start
d
Time remaining indicator
e
Heater indicator
f
Rinse Aid indicator
g
Programme button
h
Programme indicator
Quick start
1
Remove all food scraps and load the dishes.
2
Add detergent.
3
Check rinse aid.
4
Check that there is nothing obstructing the spray arms.
5
Close the door.
6
Turn the POWER button ON. All the programme indicators will light up.
7
Press the Programme button to select a wash programme.
After five seconds, the selected wash indicator light will flash when the programme is in
progress, the dishwasher will beep once and the wash programme will start automatically. The
Time Remaining display will display the estimated time for the programme (models DW60CDW2
and DW60CDX2 only).
At the end of the wash cycle, your dishwasher will beep six times, and all the programme
indicators will light up.
8
Leave the door slightly ajar to improve the drying performance.
9
After several minutes, set the POWER switch to OFF.
10
Remove dishes once they are cool enough to touch.
Fig. 2 Control panel for models
DW60CSW1 and DW60CSX1
Fig. 3 Control panel for models
DW60CDW2 and DW60CDX2
bc efdg h