Fisher & Paykel DW60 Dishwasher User Manual


 
16
Loading
Take care when loading dishes to ensure that there is enough space and room for the water to
reach all areas, particularly the cup racks. If there are any items blocking the spray arms’ paths or
the wash water, then the performance will be ineffective.
Before placing the dishes in the dishwasher, remove larger food particles to prevent the filter
from becoming clogged.
If the pots and pans have baked-on food residue that is extremely hard to remove, we
recommend that they are soaked before being washed. This will eliminate the need for extra
wash cycles.
How to load the lower rack
The tines on the lower rack can be folded down so large items like pots and pans can be placed
flat on the basket.
We recommend that you place the most difficult-to-clean items on the lower rack: pots, pans,
lids, serving dishes and bowls.
Place serving dishes and lids on the sides of the racks to avoid blocking the rotation of the top
spray arm.
The cutlery basket can be halved as shown in Fig
4 , so that you can use just one section when
the cutlery load is light. This also makes space for
additional pots and pans.
Place cutlery in the cutlery basket with the
handles at the bottom. If the rack has side baskets,
place spoons individually into the appropriate
slots. Place long utensils in the horizontal
position at the front of the upper rack. Place
knives and other utensils with sharp points in the
basket with their points down, or in a horizontal
position.
Fig. 4 Cutlery basket