Filter
Top Products
22
Fault codes
Please read the following pages before you call for service.
You can correct many of your dishwasher’s problems yourself, using the checklists on the
following pages.
Problem Fault
code
Possible causes What to do
First 2
programme
indicators
flashing
E1
The door is not properly closed. Close the door firmly.
1 and 3
programme
indicator lights
flashing
E2
Temperature sensor faulty Turn the water and power off to
the dishwasher. Call your Fisher
& Paykel dealer or Authorised
Service Centre.
1 and 4
programme
indicator lights
flashing
E3
Drain hose is too low.
The wash water level is too low.
Ensure that drain hose is
connected in accordance with the
‘Installation instructions’.
Programme
indicators 1, 3
and 4 flashing
E4
Drain hose is crimped or bent.
The wash water is not draining out.
Drain hose is too high.
Check hose and straighten if
needed.
Ensure that drain hose is
connected in accordance with the
‘Installation instructions’.
First 3
programme
indicators
flashing
E5
Water tap not turned on.
Insufficient water supply pressure.
Water supply hose is crimped or
bent.
Drain hose is too low.
Ensure the water is connected
and turned on.
Check household water pressure.
Check hose and straighten if
needed.
Ensure that drain hose is
connected in accordance with the
‘Installation instructions’.
First 4
programme
indicators
flashing
E6
Flood switch activated. Turn the water off and the mains
power off to the dishwasher. Call
your Fisher & Paykel dealer or
authorised service centre.
If the dishwasher still will not work, or shows any other error display:
Power the dishwasher OFF and wait for a few minutes.
Power the dishwasher ON and retry.
If the dishwasher still does not function, and/or the problem persists, contact your Fisher &
Paykel Dealer or Authorised Service Centre.