Filter
Top Products
13
Using your dishwasher
Pausing a wash programme after the keylock has been automatically activated
1
Deactivate the keylock (see instructions above).
2
When the display shows KEY LOCK DEACTIVATED, press the button. The display will
show PAUSED and then PRESS TO CONTINUE.
Note: If your dishwasher has been paused for more than 30 seconds, you will need to deactivate
the keylock again before you can resume the wash programme.
3
Press the button again to resume the wash programme.
Cancelling a wash programme after the keylock has been automatically activated
1
Deactivate the keylock (see instructions above).
2
When the display shows KEY LOCK DEACTIVATED, press the button until
PAUSED is displayed.
3
Keep the button held down while the display counts down: CANCEL 5.. 4.. 3.. 2.. 1
4
When CANCEL appears on the display by itself, release the button.
The word CANCELLING will flash on the display for 45 seconds, followed by
CANCELLED and a short tune.
5
Now you may either turn the dishwasher off by pressing the button or press the button
to start a new wash programme.
Note: cancelling a wash programme before it is complete may result in detergent staying
in the machine and on the dishes.