Filter
Top Products
3
Safety and warnings
Installation
This dishwasher must be installed and positioned in accordance with the ‘Installation
instructions’ before it is used. The installing plumber and electrician are responsible for ensuring
that installation complies with applicable laws and regulations.
Installation and service should be performed by a qualified technician.
If the power supply cable is damaged, it must be replaced by the manufacturer or Authorised
Service Centre or a similarly qualified person in order to avoid a hazard.
Ensure the dishwasher is placed between cabinetry. Failure to do so may result in an unstable
product, which may cause damage or injury.
The appliance should be connected to the water main using only the new hose supplied. Old hose
sets should not be used.
Underbench installation: To prevent possible steam damage to the cabinetry, ensure the
bare wood surrounding the dishwasher is sealed with an oil-based paint or moisture-proof
polyurethane.
Do not operate this dishwasher if it is damaged, malfunctioning, partially disassembled or has
missing or broken parts, including a damaged power supply cable or plug.
Do not store or use petrol or other flammable vapours and liquids in the vicinity of the
dishwasher.
Connect to a properly rated, protected and sized power supply circuit to avoid electrical overload.
Make sure that the power supply cable is positioned where it will not be stepped on, tripped over,
or otherwise subjected to damage or stress.
Do not install or store the dishwasher where it will be exposed to the weather or temperatures
below freezing.
Do not use an extension cable or portable electrical outlet device (eg multi-outlet power board)
to connect the dishwasher to the power supply.
Maintenance
Do not repair or replace any part of the dishwasher or attempt any servicing unless specifically
recommended in this user guide. We recommend that you call a Fisher & Paykel Authorised
Service Agent.
This symbol on the inlet hose water valve box denotes that, cautions need to be taken when
handling the inlet hose water valve while the product is connected to power supply, because the
working voltage of the water valve exceeds 50V~.
Keep the floor around your dishwasher clean and dry to reduce the possibility of slipping.
Keep the area around and underneath your dishwasher free from the accumulation of
combustible materials, such as lint, paper, rags and chemicals.
When cleaning the underside of the filter, take care on the sharp outer edge to avoid the risk of
cut type injuries.
If the dishwasher is not operating properly or requires maintenance, disconnect the dishwasher
from the power supply.