Filter
Top Products
24
Burners and pan supports
You can remove and clean these parts with hot soapy water or other appropriate products - see
‘Cleaning chart’.
After cleaning, check that the burners and their flame spreaders are dry before replacing
correctly.
It is very important to check that the burner flame spreader and the cap have been correctly
positioned. Failure to do so can cause serious problems.
Note: To avoid damage to the electric ignition do not try to light the cooktop when the burners
are not in place.
Replacing the burners
It is very important to check that the burner flame spreader “F” and the cap “C” have been
correctly positioned (see fig. 9).
Failure to do so can cause serious problems.
Check that the ignitor S (figs. 9 and 11) is always clean to ensure trouble-free sparking.
In the models with the flame failure safety device, check that the probe T (figs. 9 and 11) next to
each burner is always clean to ensure correct operation of the safety valves.
Both the ignitor (S) and probe (T) must be very carefully cleaned using a toothbrush and
methylated spirits.
Care and cleaning
C
Fig. 9 Correct line-up of the burner parts
T *
S
F
Fig. 10 Replacing the burner cap
* Models with flame failure device only