Filter
Top Products
34
US
CA
User preference settings
USER SELECT function
USER SELECT function allows you to configure some of the settings displayed on your oven
control panel.
How to enter USER SELECT function
1
Be sure that the function and temperature knobs are off, that no automatic programs are
operating and that the clock is displaying the correct time.
2
Press the TIMER and the CLOCK buttons and hold them down together until the oven beeps
(about two seconds). The function display will show USER SELECT.
How to use SABBATH mode
This mode is designed for religious faiths that observe a ‘no work’ requirement on the Sabbath.
When your oven is in SABBATH mode
Clock, temperature and function displays will be disabled.
No tones will sound.
No error messages or temperature changes will be displayed, however temperature can be
adjusted.
If you set SABBATH mode with the oven door open, the oven lights will stay on while in SABBATH
mode. If you set SABBATH mode with the oven door closed, the oven lights will stay off while in
SABBATH mode.
BAKE is the only function available in SABBATH mode.
How to set SABBATH mode
1
Enter the USER SELECT function and turn the function knob clockwise until SAB MODE appears
in its display.
2
Select the length of time you wish to stay in SAB MODE by rotating the
PUSH TO
CLEAR
button. The
maximum is 99 hours, in one hour steps, and is shown in the clock display.
3
Select a temperature.
4
To start SABBATH mode, press the
PUSH TO
CLEAR
button. The function and temperature displays
will go out. Temperatures can be adjusted but the display will not change.
5
In double oven models, you can select different temperatures for the upper and lower ovens by
using their temperature knobs. In order to activate the lower oven, however, you also need to
turn its function knob one position clockwise (you will see no change in the function display).
Tips for using SABBATH mode
The oven can be turned off at any time during SABBATH mode by turning the function and
temperature knobs to OFF, but the oven will not revert to regular operation until the set time has
elapsed.
You can exit SABBATH mode at any time by pressing the
PUSH TO
CLEAR
button and holding it
down for five seconds.